This Eames lounge chair brown rosewood replica pairs deep chocolate aniline leather with rosewood veneer shells, and the matching ottoman comes in the same finish. It is a Sederica reproduction inspired by the 1956 lounge chair by Charles and Ray Eames, built to the same reclined posture and proportions.
Of all our leather and wood combinations, this is the most formal. Rosewood brings a red-brown grain with dark streaks, and chocolate leather gives it a calm, dark field to sit against. Choose it for a study, a library wall or a living room that leans classic rather than Scandinavian.
Key Points of the Chocolate and Rosewood Set
- Chocolate brown Italian aniline leather: soft from the first day, and it darkens slightly where you sit, so the seat and arms gain character over the years.
- Rosewood veneer on both faces of every shell: the back of our chair is finished as well as the front, which matters on a swivel chair that often turns its back to the room.
- 7-layer laminated veneer shells: thin cross-laid layers hold the curve and resist cracking and warping.
- Hand-sewn cushions with welted, piped edges: the piping strengthens the seams where a lounge chair takes most of its wear.
- Shock-mounted shells: the back gives a little as you lean into it, so the recline feels deep and easy.
- Five-star aluminium base with a 360-degree swivel: turn towards the fire or the window without dragging 24 kg across the floor.
- Matching ottoman included: same leather, same veneer, so nothing needs colour-matching later.
Why Pair Chocolate Leather with Rosewood?
Rosewood has more movement in its grain than walnut. Light reddish bands run beside near-black lines, and in the evening the shells catch the lamplight. Against that figure, chocolate leather stays quiet, which keeps the chair from looking busy.
With walnut, chocolate leather blends into the shell and the chair reads as one dark shape. With rosewood there is a visible step between leather and wood, so the curve of each shell shows clearly from across the room. That outline gives this set its club-room, slightly more formal look.
It also suits rooms where black leather would feel too stark. Deep wall colours such as forest green, navy or terracotta plaster sit well beside it, as do brass lamps and framed prints. In an office reception or a consulting room, the set looks considered without feeling corporate.
Eames Lounge Chair Brown Rosewood: Leather, Shells and Base
Leather. Our cushions are covered in Italian aniline leather, dyed through rather than sealed under a heavy surface pigment. You can see the natural grain of the hide, and it feels warm when you sit down. The trade-off is honest: aniline leather marks and fades more readily than coated leather, so it needs a little care.
Shells. Each shell is pressed from seven layers of laminated veneer, with rosewood veneer on both faces. Because it is real wood, no two sets share the same figure, and one shell may carry wider pale bands than the next. If you want to judge build quality on any Eames-style chair, the shell edge is the place to look, and we explain why in our guide to spotting a poorly made Eames lounge chair.
Base. Shock mounts join the seat and back shells to the aluminium frame. Below sits a five-star aluminium base with a 360-degree swivel, its arms dark at the sides with polished top edges, which keeps the base visually light under the dark leather. The ottoman stands on its own four-star base.
A Note on Rosewood, Then and Now
Charles and Ray Eames introduced the lounge chair and ottoman in 1956, and dark Brazilian rosewood shells were part of its look from the start. That timber is no longer available for new furniture. Brazilian rosewood was added to Appendix I of CITES in June 1992 and to the strictest annex of the EU wildlife trade rules a month later, which effectively ended its commercial trade.
Any new rosewood chair sold in Europe today, ours included, uses other rosewood (palisander) species. For the wider story of the design, read our history of the Eames lounge chair.
Set Dimensions and Specifications
| Specification | Chair | Ottoman |
|---|---|---|
| Upholstery | Chocolate brown Italian aniline leather, hand-sewn, welted and piped | Same |
| Shell | 7-layer laminated veneer, rosewood on both faces | Same |
| Base | Polished aluminium base, five-star, 360-degree swivel | Aluminium, four-star |
| Brand | Sederica replica, inspired by the 1956 Charles and Ray Eames design | Included in the set |
Allow about 165 cm of floor length for chair and ottoman together, plus some clearance behind the headrest so the chair can turn. At 33 kg for the pair, plan on two people if it has to go up stairs.
| Feature | Chair | Ottoman |
|---|---|---|
| Overall width | 87 cm | 65 cm |
| Overall depth | 87 cm | 54 cm |
| Overall height | 82 cm | 54 cm |
| Seat height | 42 cm | – |
| Chair weighs | 24 kg | 9 kg |

Who This Set Suits, and Who Should Look Elsewhere
This set is a good fit if:
- you want a reading or listening chair for a study, a library corner or a living room with a classic feel
- your floors are mid-tone or warm wood, where the red-brown rosewood keeps the chair from disappearing
- you like visible wood grain and a clear line between leather and shell
Consider another version if:
- you prefer a quiet, tone-on-tone look. Our chocolate brown walnut set blends leather and shell into one shape
- your room is pale and Nordic, with white oak and grey textiles. Rosewood can look heavy there, and our white leather and ash set fits better
- you need to sit upright at a desk. Look at our Eames-style office chairs instead
- a cat sharpens its claws on the furniture, because aniline leather shows scratches
Chocolate Rosewood vs Our Other Brown and Rosewood Sets
| Set | Leather | Shell | Base | The look |
|---|---|---|---|---|
| Chocolate Brown, Rosewood (this set) | Chocolate brown aniline | Rosewood | Aluminium, polished top edges | Formal, visible step between leather and wood |
| Chocolate Brown, Walnut | Chocolate brown aniline | Walnut | Polished aluminium | Tone-on-tone, quieter |
| Chocolate Brown, Walnut, Chrome | Chocolate brown aniline | Walnut | Chrome | For rooms with steel, glass and concrete |
| Black, Natural Rosewood | Black aniline | Rosewood | Polished aluminium | Sharp, high contrast |
| Tan Brown, Rosewood, Chrome | Tan brown aniline | Rosewood | Chrome | Lighter and warmer, more relaxed |
All five share the same chair shape, so the choice comes down to leather, veneer and base. See every combination in our Eames lounge chair replica collection.
Looking After Dark Leather and Rosewood Veneer
- Dark leather shows dust and pale lint before it shows marks. A soft brush attachment on a vacuum, on low suction, clears the button folds in a minute.
- For spills, press a dry microfibre cloth onto the leather to lift the liquid, then let it dry at room temperature. Never use a hairdryer.
- Once or twice a year, apply a cream made for aniline leather. Try it first on a hidden spot, such as the underside of the headrest cushion, as it can deepen the colour.
- Strong sun changes both aniline leather and wood veneer. If the set stands near a south-facing window, draw the blinds on summer afternoons.
- Dust the shells with a dry cloth and remove fingerprints with a barely damp one, then dry. Skip wax and spray polish, which can leave a cloudy film on finished veneer.
- Twice a year, check the bolts under the seat and on the base, and tighten them gently if the chair has started to creak.
Chocolate Brown Rosewood Eames Chair: Your Questions
Is the rosewood on this chair Brazilian rosewood?
No. Brazilian rosewood has been protected under CITES Appendix I since 1992, so it cannot be traded commercially for new furniture. Our shells use rosewood veneer from other species, which is why we describe them simply as rosewood.
Does chocolate leather look black next to the rosewood?
In dim evening light it can look very dark, but the rosewood beside it keeps it reading as brown. The red tones in the grain draw out the warmth in the leather. In daylight it is clearly a deep brown.
Should I choose rosewood or walnut with chocolate leather?
Choose rosewood for more grain, more contrast and a more formal look. Choose walnut, our chocolate brown walnut set, if you want the leather and shell to blend into one calm, dark shape. Both use the same leather and the same chair shape.
Will the leather and rosewood change colour over time?
Yes, slowly. Aniline leather softens and takes on a slight sheen where hands and heads rest, and strong sunlight can lighten it. Wood veneer also mellows under daylight, so keeping the set out of direct sun helps both age evenly.
Why do the rosewood shells have pale and dark stripes?
Rosewood grows with contrasting bands, and the veneer is sliced so those bands show on the surface. The pattern changes from shell to shell, so the headrest, back and seat on your chair will not mirror each other exactly. We see that as the character of real wood, not a fault.
This set is a Sederica replica inspired by the 1956 design by Charles and Ray Eames, with no connection to the rights holders. See our Legal Disclaimer for terms.













Reviews
There are no reviews yet.